Russ, I have a manual for the Tx2 and will try to describe both connectors. I
don't have digital rendering so we'll do the best we can.
Round Plug.
Looking at the number side view (front) 1 - 8. Pin 9 is not used
1 - BLACK
2 - WHITE
3 - GREEN
4 - BLUE
5 - ORANGE
6 - YELLOW
7 - BROWN
8 - RED
Cinch Jones Plug.
Solder side view.
1 - BLACK
2 - WHITE
3 - GREEN
4 - BLUE
5 - ORANGE
6 - YELLOW
7 - BROWN
8 - RED
Note: In my manual there is a hand written message and a modification to the
round plug information. Penciled in is "FRONT", and the other word is blacked
out with market pen. My rotor is NIB and I would also like a confirmation on
these pinouts. That what I have. Hope it helps...
73 de n8csp
"Healy, Rus" wrote:
> Gang,
>
> I have a Tailtwister with the 8-pin Amp (round, twist-lock) connector. The
> control box has a Cinch-Jones connector. The manual I got with the rotator
> doesn't show these connector pinouts, so I'd appreciate hearing from anyone
> who has the pinout information (or a link to it) so I can wire the
> connectors and get the upper antennas spinning on the back tower! Thanks in
> advance.
>
> BTW, Cable Experts (www.cablexperts.com) sells the pair of mating connectors
> (Cinch-Jones male for the control box end, Amp male with female pins) for
> $10.95.
>
> --73, Rus, K2UA
>
> __________________________
> Rus Healy
> Senior Systems Engineer
> Adaptive Broadband Corporation
> Tel +1-716-242-9600
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|