I would suggest an Ohm meter.
73
Jim W7RY
-----Original Message-----
From: Healy, Rus <rhealy@adaptivebroadband.com>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Thursday, August 12, 1999 10:27 PM
Subject: [TowerTalk] Pinouts for tailtwister connectors
>
>Gang,
>
>I have a Tailtwister with the 8-pin Amp (round, twist-lock) connector. The
>control box has a Cinch-Jones connector. The manual I got with the rotator
>doesn't show these connector pinouts, so I'd appreciate hearing from anyone
>who has the pinout information (or a link to it) so I can wire the
>connectors and get the upper antennas spinning on the back tower! Thanks in
>advance.
>
>BTW, Cable Experts (www.cablexperts.com) sells the pair of mating
connectors
>(Cinch-Jones male for the control box end, Amp male with female pins) for
>$10.95.
>
>--73, Rus, K2UA
>
>__________________________
>Rus Healy
>Senior Systems Engineer
>Adaptive Broadband Corporation
>Tel +1-716-242-9600
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|