Rohn makes a set of guy arms for 4 point guying. One is a Y shaped arm that
bolts to the standard guy bracket and give you two guy arms at 90 degrees. The
other two guy arms are like a torque arm with a formed angle. They each bolt
to the std guy bracket and due to the angle, provide a 90 degree guy angle.
This hardware is normally used on their FK25G tiltover towers for 90 deg
guys.
Sorry I don't have the part numbers.
Bruce AA4Z
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|