Towertalk
[Top] [All Lists]

[TowerTalk] Drain on beam end caps

To: <towertalk@contesting.com>
Subject: [TowerTalk] Drain on beam end caps
From: dick@libelle.com (Dick Flanagan)
Date: Thu, 20 Nov 1997 08:19:29 -0800
At 7:56 AM -0800 11/20/97, Charles H. Harpole wrote:
>I make a small hole in the lower part of all boom and element end caps for
>drain on beams.  K4VUD

Interesting point.  I am in the process of putting a TH-11 together and it
uses dampening cord in the small elements with plastic end caps on all
elements and the boom.  Except for drain holes in the (six) traps, there
appears to be no other attempts at providing moisture drainage.  Ditto for
the 40-2CD I am putting together.

Should I be drilling drain holes in all of the elements?  In the end caps?

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada (South of Reno)
Visit http://www.qsl.net/w7di/



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>