Towertalk
[Top] [All Lists]

[TowerTalk] Force 12: rivets, hardware

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force 12: rivets, hardware
From: force12@interserv.com (force12@interserv.com)
Date: Mon, 17 Nov 1997 18:07:41 -0800 (PST)
Good afternoon, Steve.

Need to make a correction on your longevity statement and I hope everyone 
who read it also reads this one! The 3 year statement is quite incorrect.

Antennas using the current Force 12 mechanical techniques (e.g. riveted 
element junctions) have been around a long time. Under the name "Force 12", 
the line is more than 6 years old. The C-3 alone has been around for 4 years 
(reference the latest sale ad in CQ and QST).

Riveted antennas have been in use at my location since 1978. Antennas that 
eventually became the prototypes for the Force 12 product line line were 
built 8 years ago. I had built antennas privately for several years and 
utilized a variety of element junction techniques, including fully welded 
joints. I don't recommend this approach, as making changes is quite 
difficult!

When making the decisions for element junctions, we selected the method that 
had proven to be the best over time. For the proper size element segments, 
closed end rivets are the best technique. Larger diameters where the tubing 
is thick enough to not compress are better served with machine screws or 
bolts.

If anyone has an ARRL Antenna Book around, the subject of riveted junctions 
is addressed there, also.



Have a good day and 73,
                        Tom, N6BT
                        Force 12 Antennas and Systems
                        (Home Page   http://www.QTH.com/force12 )



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>