In a message dated 97-11-08 22:26:47 EST, owner-towertalk@contesting.com
writes:
> I am building a new station at a new location, and I would like to have a
> neat bulkhead panel for the shack, rf ground, lighting, etc. The house is
> stucco, and I would like to know the neatest way for installing a bulkhead
> panel (like copper) and how to mount it so that it looks professional,
> and does the job. I would like to have about 6-8 coax feed throughs,
> with PolyPhaser bulkhead coaxial protectors. Do I just drill holes for
> the PolyPhasers into the copper panel? How is this panel mounted /
> secured in a hole cut into through the stucco and inside wall.
>
> Sorry for such basic questions, but I really want to do this right.
>
> So any detailed suggestions onthe best wayto do this would be greatly
> appreciated.
>
> Herb
>
> herbr@netcom.com
>
---------------------
Forwarded message:
From: owner-towertalk@contesting.com
To: owner-towertalk@contesting.com
To: <towertalk@contesting.com>
Date: 97-11-08 22:26:47 EST
|