Topband
[Top] [All Lists]

Re: Topband: F connector how-to video

To: VE6WZ_Steve <ve6wz@shaw.ca>, topband <topband@contesting.com>
Subject: Re: Topband: F connector how-to video
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Thu, 3 Feb 2022 21:12:47 -0800
List-post: <mailto:topband@contesting.com>
On 2/3/2022 7:29 PM, VE6WZ_Steve wrote:
“Why the “F” won’t it go on ?”
https://youtu.be/pE04tDpdhRA <https://youtu.be/pE04tDpdhRA>
73, de steve ve6wz
_________________
YMMV, but what I do is actually use the conical spreading tool you show 
on the video (that you say doesn't work) and it works perfectly for me 
every time.  I only use Belden connectors, like the ones you show but
don't use.  I prefer the yellow Palladin stripper and the Platinum Tools 
Copper Clad Steel Coax Cutters available at Tech Tool Supply.
You are correct that heat is magic for making them go on
easily.  Same as putting hoses on hose barbs (or removing them).  For
hoses I use boiling water.

73
Rick N6RK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>