If your joy is 160 then go with the array that will maximize the
results. Multiband arrays are going to be compromise and degrade your
160 performance. You need to determine what is more important. You
still might be able to use a 160 array on the other bands but not optimally.
W0MU
On 10/14/2019 8:34 AM, David Olean wrote:
I am pondering an eight circle array. At present my only ham band
that I am QRV on is 160 meters. A few years ago I had 28 thru 24 GHz
all percolating, but the maintenance was killing me. i was a slave to
the station. Now I am having fun! Rather than tweaking with noise
figure meters and VNAs, I now do all my work with wrenches and chainsaw.
There are several choices for 8 circle arrays. My question is how
much benefit would I get from the single band version as opposed to a
dual or three band choice? Reading the hype is always fraught with
danger. Practical experience is always better. My thinking is that
if there is a distinct advantage, I would go with a 160 only setup and
forego the other bands. I can carve out a 200 ft circle with a little
chainsaw action. I have about 180 ft of field available now, so can
get the room with not too much trouble.
I also better hook up my 160 transceiver quick. It is still packed
away from Field Day!!
Comments?
Dave K1WHS
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|