Topband
[Top] [All Lists]

Re: Topband: Drones for antenna installation?

To: "topband@contesting.com" <topband@contesting.com>
Subject: Re: Topband: Drones for antenna installation?
From: David G4FTC <g4ftc@hotmail.com>
Date: Sat, 31 Aug 2019 06:11:37 +0000
List-post: <mailto:topband@contesting.com>
Hi All,

As a alternative to a drone, I would recommend an Arborist Sling-shot, namely

https://www.eham.net/reviews/detail/6687

and

https://www.sherrilltree.com/climbing-gear/throwlines-weights/bigshot-launchers?Brand=Brand%3ANOTCH-EQUIPMENT&ea_a=Brand%3ANOTCH-EQUIPMENT&ea_bc=&ea_c=&ea_path=climbing-gear%2Fthrowlines-weights%2Fbigshot-launchers

In the UK we can also buy a 4ft extension pole which makes accurate aiming much 
easier. The trigger assembly is also recommended.

Tip - a light-weight weight and line will give you greater height although a 
heavier weight will help the line to drop to the ground.

Getting over a 65ft tree is no problem!

David G4FTC


________________________________
From: Topband <topband-bounces@contesting.com> on behalf of Dwight Jones 
<DwightJones@outlook.com>
Sent: 30 August 2019 19:16
To: topband@contesting.com <topband@contesting.com>
Subject: Topband: Drones for antenna installation?

I have been thinking about purchasing a drone. It just occurred to me that I 
might be able to use it to install antenna wires. A row of trees separates my 
lot from my neighbor's. The row is about 150 feet long and 65 feet high. A 
similar row runs in front of my house, but that row is closer to power lines.

Should I use the drone to drop a wire directly on the trees? Or should I drop a 
fishing line and try to pull a wire through all those trees? A third option is 
to use a Cushcraft MA160V.

I'm a newbie on 160 (and don't claim any great skill on other bands...)

Dwight
KO6FE
CN71
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>