| To: | <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: Rather use N-type (was Re: The answer to PL-259 |
| From: | <john@kk9a.com> |
| Date: | Sat, 8 Dec 2018 18:43:36 -0500 |
| List-post: | <mailto:topband@contesting.com> |
A BNC connector has a Ø.050 pin and when mated property an N connector has a Ø.120 center pin. John KK9A Tim Duffy k3lr wrote: When you look at an N connector, specifically the center pin - remember that the N connector center pin is the same as the center pin of a BNC connector. W6NL asked me this question - would you run 1500 watts with BNC connectors? 73 Tim K3LR _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| Previous by Date: | Re: Topband: Effect of Radial Field on Antenna Impedance, Wes Stewart |
|---|---|
| Next by Date: | Topband: Hi-z array, Steve via Topband |
| Previous by Thread: | Re: Topband: Rather use N-type (was Re: The answer to PL-259, donovanf |
| Next by Thread: | Re: Topband: Rather use N-type (was Re: The answer to PL-259, John Harden, D.M.D. |
| Indexes: | [Date] [Thread] [Top] [All Lists] |