On Tue, 4 Sep 2018 18:36:54 -0500
Jeff Draughn <n0ost99@gmail.com> wrote:
> I’m looking for suggestions for radial wire that will lay as flat as
> possible. I realize that’s probably what everyone is looking for,
> however I have used the wire from the big box stores THHN etc. and it
> always has that permanent curl to it or permanent for a good long
> while.
>
> Anyone know of anything that is very flexible right out of the gate
> test lead wire comes to mind but probably too expensive.
> Thanks
> Jeff, N0OST
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
Hi Jeff
There are many, it all depends on what you want to do and how much of a
radial system you want.
The easy one that comes to mind is https://tinyurl.com/y7ydu5wj
I have used aluminum siding in the past works well, takes time and work
to connect it together.
There are many others that have done this with their 3 or 4 etc squares
antennae too.
Cheers AJ___ VE3HJ
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|