| To: | <topband@contesting.com> |
|---|---|
| Subject: | Topband: 160M Balun |
| From: | "N2TK, Tony" <tony.kaz@verizon.net> |
| Date: | Fri, 30 Mar 2018 07:22:18 -0400 |
| List-post: | <mailto:topband@contesting.com> |
I shunt feed my tower for Topband. Presently using a Comtek 100 bead balun. After reading K9YC's article on baluns it would seem that a stack of five #31 cores with 7 turns of coax would be a better balun. Would I notice an improvement in any way by switching baluns? If the answer is I would notice an improvement what about using sixteen turns #12 THHN wire on #31 core as shown in K9YC's article? How many cores would I need for 1500W? Tnx for any feedback N2TK, Tony _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: 160m polarization and elevation angles, donovanf |
|---|---|
| Next by Date: | Topband: Straws in the Wind ....A 160m Dx'ing Sea Change is Upon us!, k1zm--- via Topband |
| Previous by Thread: | Topband: BOG wire, N7DF via Topband |
| Next by Thread: | Re: Topband: 160M Balun, Grant Saviers |
| Indexes: | [Date] [Thread] [Top] [All Lists] |