I had a few hours free yesterday afternoon, so I began the dual 80/160
radiator inv. L project.
In the process, I found that water had entered the coaxial center insulator
that was used at the feedpoint of the antenna.
Does anyone have a favorite solution for a weatherproof, coaxial feedpoint
for this type of antenna???
The radials are attached to several load center ground bars, that are
screwed into a copper pipe that is driven into the ground.
The pipe gives me a rigid mounting point for some kind of insulator or
standoff.
BTW, after a temporary fix, I ran some quick SWR tests. There appears to be
very little interaction between the elements. At least from an SWR
perspective.
de Art NK8X
ᐧ
On Mon, Oct 17, 2016 at 11:16 AM, Art Snapper <art@nk8x.net> wrote:
> I was considering adding a second vertical element to my 160 inverted L.
> This one would be roughly a quarter wave tall for use on 80.
>
> I tried modelling in Eznec, but wasn't comfortable with the results. I may
> have screwed it up.
>
> Has anyone tried it for real? Is it a big compromise on either band? Would
> a switch at the feedpoint have any benefit?
>
> My inverted L has about 50 radials.
>
> 73
> Art NK8X
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|