Topband
[Top] [All Lists]

Re: Topband: inv. L

To: "topband@contesting.com" <topband@contesting.com>
Subject: Re: Topband: inv. L
From: NC3Z Gary <nc3z@outlook.com>
Date: Mon, 17 Oct 2016 20:26:38 +0000
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Art, I put one up this spring with the encouragement on this list. The 
L's are back to back, e.g. the 160M L points north while the 80M points 
south. The vertical sections are 45' and the spacing is about 18". Fed 
with a decoupling choke at the base over 32 65' radials.

My amp tunes up with no need for a tuner or matching network and I have 
been very pleased with the performance, even for local stuff out 300-600 
miles all during the summer.

Did a lot of comparison using WSPR mode into EU and OC and the L on both 
bands trounced the resonate dipoles, on both TX and RX, so they have 
since come down.

I am considering adding a 40M element.


Gary Mitchelson
NC3Z/4 Pamlico County, NC FM15

On 17-Oct-16 11:16, Art Snapper wrote:
> I was considering adding a second vertical element to my 160 inverted L.
> This one would be roughly a quarter wave tall for use on 80.
>
> I tried modelling in Eznec, but wasn't comfortable with the results. I may
> have screwed it up.
>
> Has anyone tried it for real? Is it a big compromise on either band? Would
> a switch at the feedpoint have any benefit?
>
> My inverted L has about 50 radials.
>
> 73
> Art NK8X
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
> .
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>