Topband
[Top] [All Lists]

Re: Topband: K1FZ ground rod difficulty

To: topband <topband@contesting.com>
Subject: Re: Topband: K1FZ ground rod difficulty
From: GALE STEWARD via Topband <topband@contesting.com>
Reply-to: GALE STEWARD <k3nd@yahoo.com>
Date: Wed, 6 Apr 2016 23:28:04 +0000 (UTC)
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Harger Lightning and Grounding shows a copper plate as an alternative to ground 
rods. This is an interesting website...
Copper Ground Plates


  
|  
|   
|   
|   |    |

   |

  |
|  
|   |  
Copper Ground Plates
   |   |

  |

  |

 
73, Stew K3ND

      From: "donovanf@starpower.net" <donovanf@starpower.net>
 To: topband <topband@contesting.com> 
 Sent: Wednesday, April 6, 2016 5:34 PM
 Subject: Re: Topband: K1FZ ground rod difficulty
   
Hi Mike, 


Yes, I meant use of XELEDOP to measure the patterns of arrays 
of Beverage antennas. The results of XELEDOP measurements 
of the patterns of a large electrically steerable array of 220 foot 
Beverages used from about 7-30 MHz were never published. 


I'm sorry I wasn't clearer by failing to clarify that the XELODOP 
reference was for pattern measurements of a log periodic antenna. 


73 
Frank 
W3LPL 






   
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>