Topband: SB-1000

[Jim Murray via Topband <topband@contesting.com>]

After a pretty thorough check on the ailing 160M section this what I have in 
mind and would appreciate any further suggestions.  All previous owner wiring 
is ok.  One missing connection is 10M mod. 160M Padding cap (170pf, 7500V 
doorknob) is shot.  Band switch appears to be still usable, no damage to 
contacts etc. Idea now is to replace the cap (with "corona washer") or good 
mica cap, new style parasitic suppressor, new (al-80a) plate choke and give it 
a whirl.

Regards,jim/k2hn 
_________________
Topband Reflector Archives - http://www.contesting.com/_topband