Topband
[Top] [All Lists]

Re: Topband: fixing beverage

To: TopBand List <topband@contesting.com>
Subject: Re: Topband: fixing beverage
From: donovanf@starpower.net
Date: Mon, 23 Nov 2015 20:03:05 -0500 (EST)
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Hi Jorge, 


The AIM4170 has TDR capabilities. I don't own an AIM470, but 
surely someone on the Topband reflector can help you use it 
as a TDR. 


73 
Frank 
W3LPL 

----- Original Message -----

From: "Jorge Diez - CX6VM" <cx6vm.jorge@gmail.com> 
To: donovanf@starpower.net 
Sent: Monday, November 23, 2015 11:56:32 PM 
Subject: RE: Topband: fixing beverage 

Hi Frank 

I google and the first option was Campbellsci.es 

In 5 minutes the CX representative emailed me and told me that is a very very 
expensive toy for my use :-) 

I have the AIM4170, will do this job? I use the software AIM_852.exe I need 
another software or this is OK? 

Thanks, 
Jorge 


-----Mensaje original----- 
De: Topband [mailto:topband-bounces@contesting.com] En nombre de 
donovanf@starpower.net 
Enviado el: lunes, 23 de noviembre de 2015 06:51 p.m. 
Para: topband@contesting.com 
CC: dl8yhrfrank@aol.com 
Asunto: Re: Topband: fixing beverage 


Hi Frank, 


My TDR is nearly fifty years old, but still it works great. 


Array Solutions sells more modern multi-functions devices that are perform very 
well as a TDR. Here's an example display from Array Solutions' web site: 


https://www.arraysolutions.com/images/AIMuhf-TDR-fig1.png 


The display for a Beverage looks very similar, you can see every component from 
the shack to the termination resistor. 


73 
Frank 
W3LPL 


----- Original Message ----- 

From: dl8yhrfrank@aol.com 
To: donovanf@starpower.net 
Sent: Monday, November 23, 2015 9:20:55 PM 
Subject: Re: Topband: fixing beverage 

where can i get such toy? 






-----Urspr ngliche Mitteilung----- 
Von: donovanf <donovanf@starpower.net> 
An: TopBand List <topband@contesting.com> 
Cc: Jorge Diez - CX6VM <cx6vm.jorge@gmail.com> 
Verschickt: Mo, 23 Nov 2015 9:39 pm 
Betreff: Re: Topband: fixing beverage 





A Time Domain Reflectometer is one of the best tools to verify 
the proper performance and isolate faults of a Beverage and many 
other types of antennas. 


In the case of a Beverage, the TDR allows you to see every 
component of the antenna system from the ham shack all the way 
to the termination resistor. If anything fails you can almost 
always walk directly to it with the needed replacement parts and 
tools in hand. 


73 
Frank 
W3LPL 

----- Original Message ----- 

From: "Jorge Diez - CX6VM" < cx6vm.jorge@gmail.com > 
To: "TopBand List" < topband@contesting.com > 
Sent: Monday, November 23, 2015 8:29:15 PM 
Subject: Re: Topband: fixing beverage 

Thanks all you guys for the help 

Will do this tests and see what is wrong 

73, 
Jorge 
CX6VM/CW5W 

-----Mensaje original----- 
De: Tom W8JI [ mailto:w8ji@w8ji.com ] 
Enviado el: lunes, 23 de noviembre de 2015 02:35 p.m. 
Para: Jorge Diez - CX6VM; 'TopBand List' 
Asunto: Re: Topband: fixing beverage 

> 
> I notice that my USA beverage is lower in 3-4 S units that some weeks ago. 
> 

5-20 dB. Depending on receiver and where it is at on the S meter. 

That has to be a poor connection, open, or short between the receiver and the 
Beverage transformer end of the Beverage. It cannot be at the termination end. 


> At simple view all seems to be OK. I think the coax is not the 
> problem, because if I have a problem in the coax, will be completely deaf, 
right? 

No. Coax can do this. It happens all the time. Especially at connectors. 

> 
> So this can be the cause of a problem in the end resistor or maybe in 
> the transformer? I use in this beverage a WX0B beverage boxes 
> 

It can not be at the end resistor termination. 

The problem is if you disturb something it will often start working. You need 
to 
carefully check one thing at a time. Many times, if not most times, this is 
corrosion or tarnish on the center pin of the coax. Sometimes it is a broken 
wire, or a bad part from lightning or water. 

The best way to test it is with an SWR meter and do a frequency sweep from the 
house, before you touch the antenna or any outside connections. The frequency 
of 
either adjacent major dips in SWR or impedance will allow you to calculate 
exactly where the problem is. The MFJ analyzer will do this within a few feet, 
even on a 1000 foot cable, by using distance to fault. 

73 Tom 


--- 
El software de antivirus Avast ha analizado este correo electr nico en busca de 
virus. 
https://www.avast.com/antivirus 

_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 
_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 



_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 


--- 
El software de antivirus Avast ha analizado este correo electrónico en busca de 
virus. 
https://www.avast.com/antivirus 


_________________
Topband Reflector Archives - http://www.contesting.com/_topband
<Prev in Thread] Current Thread [Next in Thread>