Topbanders,
i have a spool of twisted wire for military field telephone use, similar
to WD1-A . It has some strands of copper and some strands of steel.
I built the reflection transformer and installed both the transformer
and the wire . The length of the beverage is about 200m. To my surprise
i measure about 25Ohms with a Multimeter at the feed end of the beverage.
So there is 200m one way, the transformer, and 200m back = 400m of wire.
I believe 25 Ohms is way to high for 400m?
Any advise welcome.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|