Re: Topband: BCB interference ?

[wb6rse1@mac.com]

I had a local BC station start to produce spurs that overloaded an external 
preamp for my full size RX flag. The Array Solutions W3NQN RX filter did the 
job. I tried an Array Solutions AS-402 BCB High Pass Filter but it doesn’t have 
the brick wall response of the W3NQN design. For all I know, my local BC 
station is still malfunctioning. The Clifton Lab design looks as if it should 
work comparably to the W3NQN filter.

The Array Solutions AS-RXFEP front end protector should be consider if your RX 
and RX antennas are close and your run QRO.

Steve WB6RSE



_________________
Topband Reflector Archives - http://www.contesting.com/_topband