Jim,
I made a braid breaker by using a binocular core 73-202 with 2 turns primairy
and 2 turns on
secondary . The term braid breaker comes from John s latest edition of low band
DX ing
I found that it is difficult to get signal levels identical on both elements
when using it, so maybe better to use a good common mode choke at the feedpoint
.
Luc
ON4IA
On Sunday, June 8, 2014 5:24 AM, Jim Brown <jim@audiosystemsgroup.com> wrote:
On 6/7/2014 12:13 PM, luc kerkhofs via Topband wrote:
> does it make sense to decouple the feedline
> at the feedpoint with a braid breaker ?
It DOES make sense to decouple the feedline. I've never heard of a
"braid breaker." Under NO conditions should you open the shield == that
prevents the shield from being a shield. The good ways to decouple the
feedline are 1) a good transformer, a good common mode choke, and
radials. See Chapter 8 of http://k9yc.com/RFI-Ham.pdf for winding
guidelines for the choke.
73, Jim K9YC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|