Luc,
I have not taken any steps to decouple the coaxial cable shield from the
verticals in my 8-circle BSEF array. I use eight 23 meter long radials
with each vertical. Its not clear to me how decoupling the shield
would improve the already excellent performance of the array.
73
Frank
W3LPL
----- Original Message -----
From: "luc kerkhofs via Topband" <topband@contesting.com>
To: topband@contesting.com
Sent: Saturday, June 7, 2014 8:13:01 PM
Subject: Topband: Feedpoint of short RX vertical
Hello,
trying to improve my RX setup, I have a question .
When feeding short RX verticals with a coil and resistor in series, does it
make sense to decouple the feedline
at the feedpoint with a braid breaker ?
73
Luc
ON4IA
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|