-----Original Message-----
From: Charlie [mailto:charlie-cunningham@nc.rr.com]
Sent: Monday, June 02, 2014 1:13 AM
To: 'W0MU Mike Fatchett'
Subject: RE: Topband: Using 80m 1/4 vertical on 160
Hi, Mike
Could you add 1 or 2 top wires and turn it into an inverted-L or Tee for
topband? Or you could add an 80m trap at the top followed by enough
horizontal (or sloped) wire to resonate on 160, while preserving the 80 m
function?
Any of those configurations should work well on 160, I think. Probably need
to add 1 or 2 160m radials, I expect - even if you have to bend them.
(When, you say "1/4 wave vertical" I'm taking that literally.)
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of W0MU Mike
Fatchett
Sent: Monday, June 02, 2014 12:50 AM
To: topband@contesting.com
Subject: Topband: Using 80m 1/4 vertical on 160
Is this worth trying?
--
Mike W0MU
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|