Topband
[Top] [All Lists]

Re: Topband: Covered /bare antennn wire

To: "Bruce" <k1fz@myfairpoint.net>, <topband@contesting.com>
Subject: Re: Topband: Covered /bare antennn wire
From: "Tom W8JI" <w8ji@w8ji.com>
Reply-to: Tom W8JI <w8ji@w8ji.com>
Date: Thu, 15 Nov 2012 14:14:32 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Out of curiosity, has anyone ever really done testing of voltage buildup on a insulated antenna wire, VS a non-insulated wire ?
Indoor antennas VS outdoor antennas of equal size?


I tested this extensively years ago, and there was no difference at all except if the insulation was in an area of corona discharge.

All of the noise appeared related to corona, which was a function of exposed sharp points, and all of the charge for a floating wire was the same insulated or not.

I discussed this with KB8MU (just recently a SK) from NASA, because he dealt with ion propulsion and electromagnetics, and what he found on spacecraft and aircraft agreed with my earth-based experiments.

I used an electrostatic paint gun with water, and a modified garden hose, as the charged water source.

I also noticed no difference on real antennas. My higher antennas with sharp points get p-static, the low antennas or antennas with blunt ends do not. Grounding and static drains make no difference except for the popping when a dielectric charges and arcs.

73 Tom
_______________________________________________
Topband reflector - topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>