DX Engineering/s RSC-2 splitter appears to have all three antenna terminals
connected to a metal case;
i.e., the grounds are all connected together.
In ON4UNs 5th edition, he appears to recommend that the common connector (the
one to the
braid-breaker 7:5 matching transformer) not be tied to the grounds of the two
output connectors,
and shows a picture of his splitter/combiner which appears to be in a plastic
box.
Should I construct my RX splitter with all three shields connected together,
or should I isolate the common (middle) feedline shield from the other two?
This is to be used in the shack to feed tor receivers.
Terry Zivney, N4TZ
_______________________________________________
Remember the PreStew coming on October 20th. http://www.kkn.net/stew for more
info.
|