If the receive antenna is close to your transmit antenna then you will
want to think about front end protection in a radio that has two
receivers. Most single receiver radios should be shorting the receive
line to ground during transmit or taking out out of line. I don't know
with the Icom.
You may or may not need a preamp. That is something you can add later.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/24/2011 11:40 PM, Its from Onion wrote:
>
> I'm looking to build and install my first beverage receive antenna. I use a
> 756 Pro and wondering a couple questions from folks who have been there.
>
> 1. Do I need a pre-amp and if yes your suggestion.
> 2. Do I need a front end saver and your thoughts again.
>
> Thank you and
>
> 73,
> Lee
> KE4VYN
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|