The Hammonds I have used for over 20 years in the temperature and humidity
extremes of NH are the basic 1591S series black ABS.
Overkill may sound nice and may even be more covenient to obtain that same
day but it all boils down to how well a person seals his own added holes.
A short piece of PVC pipe and a couple of caps glued on also work. I had one
of those that I found under a pile of leaves last year where it had fallen a
decade ago. After cutting it open it was completely dry inside; I built that
one in the early 80's for the old QTH.
Carl
KM1H
----- Original Message -----
From: "Hardy Landskov" <n7rt@cox.net>
To: "Mike Waters" <mikewate@gmail.com>; "topband" <topband@contesting.com>
Sent: Saturday, April 23, 2011 2:11 PM
Subject: Re: Topband: Weatherproof enclosures?
>I use the same Hammond enclosures but beware some are NOT approved for
> outdoor use. You have to read the fine print on the catalog page to
> determine which ones are ok.
> GL Hardy N7RT
>
>
> ----- Original Message -----
> From: "Mike Waters" <mikewate@gmail.com>
> To: "topband" <topband@contesting.com>
> Sent: Saturday, April 23, 2011 9:49 AM
> Subject: Re: Topband: Weatherproof enclosures?
>
>
>> On Sat, Apr 23, 2011 at 7:45 AM, Paul Staupe <pstaupe@qwest.net> wrote:
>>
>>> I've put up several Beverages this Spring and am looking for suitable
>>> weatherproof UV resistant plastic enclosures to mount the feed and
>>> termination hardware.
>>>
>>> Does anyone have any suggestions?
>>>
>>> Best regards,
>>>
>>> Paul W0AD
>>>
>>
>>
>> I also use Hammond polycarbonate enclosures, and highly recommend them!
>> The
>> gasketed lids are available in clear, smoke (presently from Newark only),
>> and opaque. They come in many sizes. I have been using those for my
>> Beverage
>> antenna enclosures for some time now. You can see photos of them at
>> http://www.w0btu.com/Beverage_antennas.html
>>
>> I fill all the connectors with silicone dielectric compound, and there
>> are
>> NO air vents. I have yet to see moisture get in.
>>
>> I don't have a link or P/N handy, but Mouser (www.mouser.com) and Newark
>> have them.
>>
>> Keep in mind that the larger the enclosure, the more of a chance you have
>> for moist air getting inside. Reason being, there is a larger internal
>> pressure change with a given temperature and/or barometric pressure
>> change.
>>
>> 73 Mike
>> www.w0btu.com
>> _______________________________________________
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|