Topband
[Top] [All Lists]

Re: Topband: shunt fed towers

To: topband@contesting.com
Subject: Re: Topband: shunt fed towers
From: Tree <tree@kkn.net>
Date: Mon, 8 Dec 2008 18:33:23 -0800
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On Mon, Dec 08, 2008 at 07:36:04PM -0500, John wrote:

> would like to pose   a question to the antenna experts...read recently that a 
> tall tower say 1/4 wave with large antennas atop of it really does not work 
> well as a 160m antenna...what do the experts say?i have been using one of 
> those for years and i think they work like gangbusters but i'm not an expert 
> so it may be that for years i've been using the wrong antenna...and should 
> shorten mine to say 70 feet or so i would like to have a serious answer and 
> as i'm willing to improve my system on 160m if i've been doing it wrong for 
> 26 years...John K1GUN

I'll assume this is sarcasm.  Okay - I have now heard of at least two 
cases where tall towers work well on 160 meters.  I "eat my words".

However, there sure isn't anything wrong with a 70-80 foot tower as 
my results speak for themselves.  I do think a taller tower will have
sharper bandwidth according to the printed information - but maybe if
you get them tuned, they work fine.  

If you have something in the order of 200 feet tall - something that 
approaches 1/2 wavelength - I would think using either the reverse
feed method or 1/4 wave slopers down the tower aways (about 1/4 
wavelength from the ground) would be an attractive option.  

I have a 105 foot tower with a full sized 3 element 40 on it.  Perhaps
I should try loading it and see if I can compare the two antennas - but
since they are pretty close to each other, it might be difficult.

73 Tree N6TR
Boring, OR
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>