The directional pattern shown in fig 7-28 of LOW BAND DX-ing, ed 3, was
modeled with EZNEC ! You can see a very substabntial amount of coupling and
an almost useless radiation pattern resulted, which was the case in actual
practice.
John, ON4UN
----- Original Message -----
From: "w7dd" <w7dd@msn.com>
To: <Topband@contesting.com>
Sent: Monday, September 09, 2002 3:34 AM
Subject: Topband: Coupling between bev and other antennas
> Using Eznec I have modeled a beverage and a 1/4 wave vertical in very
close
> proximity and in many locations around the beverage. Eznec thinks there
is
> no coupling. I was surprised by this but I tend to have faith in Eznec.
>
> Don
>
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
>
|