Re; Hy-Tower 160 operation
I beleive that Hy-Gain made two different "add on' kits for the Hy-Tower
for 160 operation.
The first one was the base loading coil.
The second arrangment was a trap, that could be mounted at the top of the
tower portion of the Hy-Tower, that had an "L" wire attached for 160. This
is the set up at Jody' VP5JM's QTH. I don't know if this trap version kit
is still available, but you could certainly build your own trap if not.
73
Dan K8RF
--
FAQ on WWW: http://www.contesting.com/FAQ/topband
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|