I have never had that problem, Tom with my old Omni-D; and I got it used many
years ago! Guys on this thread will help you solve the problem. Let us know
your results. Karl, KO8S
On Wednesday, April 12, 2017 7:50 PM, "tfr001@myfairpoint.net"
<tfr001@myfairpoint.net> wrote:
Hi all,
I'm curious if any of you have had this same problem. When my Omni D was new
(to me - bought it used) it would die after about 1 hour. By "die", I mean it
would go pretty deaf and the transmit output would go nearly to zero. I fixed
it by opening it up, reseating every circuit board, and tightening up all of
the ground lugs I could find. That was about 3 months ago. It has now started
to do it again. I'm interested to know if anyone solved it once and for all.
Meanwhile, I can go do the reseating shuffle again. It's a bit of a pain to
troubleshoot, because it's difficult to get it to occur with the covers off the
rig - apparently heat sensitive.
-Tom N1OOQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|