Has the battery been replaced yet?
Duane Calvin
Sent from my iPhone
> On Jun 7, 2015, at 5:01 AM, Barry N1EU <barry.n1eu@gmail.com> wrote:
>
> I would start by replacing capacitors on the power distribution board:
> http://tentecwiki.org/doku.php?id=565pwrdistfail
>
> 73, Barry N1EU
>
>> On Sun, Jun 7, 2015 at 5:48 AM, Byron Peebles <NZ3O@arrl.net> wrote:
>>
>> I have a problem with an Orion II when first powered on.
>>
>> The unit begins to come up:
>> 1. Screen comes on, displays TT Logo, Firmware Revisions and so on.
>> 2. As the unit completes that boot, the S-Meter lights and the screen
>> goes out.
>> 3. With the screen out, there is nothing lit on the front panel. No
>> selection lights at all.
>> 4. If the screen stays lit, the lights are lit, but the main receiver
>> seems muted.
>> 5. With the main receiver muted, there is no transmit capability
>> through either VFO.
>> 6. I can hear on the sub-receiver (standard sub, not optional sub) but
>> not transmit on it.
>>
>> Is this a problem that will involve the factory?
>>
>> TIA es 73, Byron
>>
>> PS. Did Master Rest, Memory Clear, Firmware Update, Rinse and Repeat.
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|