Hello John,
I had a look at the schematic and it seems to be an 100
PF Capacitor. Your original message said that the Circuit Board location is
C42. And that it is on the LPF Board.This is where I looked on the
schematic. Sorry, I can't tell you the voltage rating. Maybe the original
part has this printed on it, if it is not burned too badly. Hopefully,
someone with an Amp open and on their bench can give you more details.
73 from Wade/KJ4WS
On Mon, Aug 26, 2013 at 3:03 PM, John Huffman <hjohnc@gmail.com> wrote:
> I burned up a capacitor in the low pass filter of my Hercules 2 amplifier.
>
> According to the schematic it is C42 with a value of "100".
>
> I'd like to replace it. Is "100" the value on the schematic in PF? It's a
> big yellow disk. What voltage cap should I buy?
>
> 73 de K1ESE
> John
>
>
> ______________________________**_________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/**mailman/listinfo/tentec<http://lists.contesting.com/mailman/listinfo/tentec>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|