Re: [TenTec] Herc 2 LP Cap?

["Phil Chambley, Sr." <k4dpk@comcast.net>]

John


As it happens, I have a Herc II opened up on the work bench.  If you 
tell me which LPF is involved (what band?), I'll see if I can give you 
some guidance.
Phil C. Sr.
k4dpk



On 8/26/2013 7:27 PM, george fritkin wrote:
> Schematics do not give a parts description and do not use what you took out, 
> maybe someone replaced the original with the wrong component.  Go to parts list 
> in manual and if not listed call TT.
>   
> George, W6GF
>   
>
> ________________________________
>   From: John Huffman <hjohnc@gmail.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Sent: Monday, August 26, 2013 1:03 PM
> Subject: [TenTec] Herc 2 LP Cap?
>    
>
> I burned up a capacitor in the low pass filter of my Hercules 2 amplifier.
>
> According to the schematic it is C42 with a value of "100".
>
> I'd like to replace it.  Is "100" the value on the schematic in PF? It's
> a big yellow disk.  What voltage cap should I buy?
>
> 73 de K1ESE
> John
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec