TenTec
[Top] [All Lists]

[TenTec] Paragon output problem

To: <tentec@contesting.com>
Subject: [TenTec] Paragon output problem
From: "Vic Klein" <vhklein@ptd.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 15 Nov 2012 06:23:17 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Lately an odd problem has shown up that I would like some help on.
Periodically the SWR indicated on my 585 Paragon will jump to around 3:1 and
the output power will drop off to about 1/4 the normal amount as seen on an
external wattmeter. This is when an external SWR indicator still shows 1:1,
or very close to that. The symptoms were such that I suspected the external
autotuner was at fault, but the radio produces the same symptom on an old
manual tuner, as well. When the SWR is showing high on the radio no
adjustments on the external tuner have any effect. This happens most often
when the rig has been in transmit use for a while on 40m and the receive
seems unaffected. It seems to revert to normal later, but with 20 minutes of
use, or so, it returns to this condition. Does anyone have suggestions about
where and what I might look for? Thanks.
 
=Vic=
WA4THR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>