Replace one with a TR4C, replace the other with an SB102!
....Sorry, but I remember many years ago when I used to go to Field Day
with
K2LSA....around the late '70s, when all those old tube rigs were
replaced with
FT101's and TS520's....we had wicked problems like this.
We ended up getting single band low pass filters from ....?? someone
that advertised in QST.
This solved the problem!
....Dave
On 10/5/2012 12:43 PM, Rick - DJ0IP / NJ0IP wrote:
A couple of my friends are preparing for an expedition for CQWW and are testing
their config.
They have 2x TS-590 transceivers and a pair of yagi antennas in close proximity
of each other (about 75' apart).
The problem, they are seeing a broadband noise as soon as they key one of the
transceivers.
Even with just 5w of power it is wiping out the other rig on all bands.
My old grey cells seem to remember we discussed this here on the Ten-Tec
reflector about 6 months ago or so.
Does anyone remember the details of this or do I have my wires totally crossed?
Was there a fix or have I dreamt this up?
TNX guys, and sorry to spam the group, but if we can get these guys fixed,
we'll have a nice multiplier in CQWW.
73
Rick, DJ0IP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|