I remember the thread, Rick... in part, because I started it.
We had issues between four TenTec rigs and four Elecraft rigs. The
single band, band pass filter was the only suggestion proffered at the
time. In our contest shack, we had two such filters on each rig-amp
combination, so we were looking for other ideas. No other solutions
were suggested.
Not good news to hear the TS-590s might cause issues, as I wanna take my
TS-590s to the next contest, because somebody dinged my beloved Omni VII
at the last outing, and I don't wanna risk any more harm to it, but I
might risk the TS-590, instead. I would hate for that to cause us more
problems than the Elecraft rigs cause us ! (said with good humor, as
we don't fully know which radios are causing the problems, other than
the Elecraft boys complained they could hear the TT boys, but not the
other way around - so we don't know if the TT rigs are noisy, or the
Elecraft rigs are overly sensitive - or whether it is an antenna or some
other issue at work.)
I wish I had a better solution, as I would like to a) solve the
problem, and b) be the one to do it.
=============== K8JHR ================
On 10/5/2012 12:58 PM, Rick - DJ0IP / NJ0IP wrote:
Yeh, but you don't carry those on airplanes, Dave.
I'm pretty sure they have bpf's, either ICE or Dundstar.
I'm looking for specifics on the TS-590.
Changing the transceivers will be an absolute last resort.
_______________________________________________
/,
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|