interesting idea
On 3/21/07, Pfizenmayer <pfizenmayer@worldnet.att.net> wrote:
>
> A "trick" under uncrowded band conditions that sometimes makes the DSP NB
> very effective is to force the main rx roofing filters to 6 or 15 Khz -
> then
> try the DSP NB. I stumbled into this one evening when I happened to
> notice
> the DSP NB worked very well on a noise using the sub reciver but was
> ineffective on the main rx. Apparently the DSP likes to see a wider
> bandwidth of noise to work on- which it does with the sub rx .
>
> 73 de Hank K7HP
>
>
> ----- Original Message -----
> From: "Gary Tuck" <gtuck@mac.com>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Wednesday, March 21, 2007 12:47 PM
> Subject: Re: [TenTec] Orion Noise Reduction Ability
>
>
> > Tried responding to the original query before but used the wrong
> > email address and 'fraid it got stuck somewhere for review.
> >
> > Certainly agree that hardware NB works very well. Takes out power
> > line noise here handily. I have found one use for the DSP NB and
> > that is with the
> > Asian OTH radar. If cranked up to 9, it takes most of it out here in
> > the OR. As for the NR, opinions vary. When I've listened to SSB
> > it does sound as if it works fairly well. On CW, it distorts the
> > signal and reduces the background noise to gurgles. Actually, more
> > harm than good. Running v2.059d here as well.
> >
> > 73, Gary W7TEA
> >
> >
> > On Mar 21, 2007, at 12:10 PM, Randy Hargenrader wrote:
> >
> >> My two centalvo's...
> >>
> >> I find the NR on the Orion V2.059 to work very well. It does an
> >> effective job of acting like a sort of squelch for SSB and I like the
> >> fact that there aren't alot of artifacts in the process. I didn't
> >> like
> >> the V1.372 NR function as it created a ton of artifacts reminiscent of
> >> an outboard DSP device like the NIR-10 and the "Hear It" speaker
> >> devices. Kind of an underwater sound...
> >>
> >> The hardware noise blanker is also quite effective on pulse noises. I
> >> have however found the DSP "side" of the NB to be totally ineffective.
> >> I have never found a situation where it makes any difference or
> >> improvement.
> >>
> >> Hope this helps.
> >>
> >> 73,
> >> Randy
> >> K4QO
> >>
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|