I had archived this note regarding the SCOUT background HISS remedy. I
contacted TEN TEC this morning and was told there is no real "fix" for the
processor hiss. Using high impedance headset helps some. I was curious if any
have
made this mod and if it is effective.
Alan KB7MBI
Woodinville, WA
------------------------------------------------------------------------------
--------------------------
http://lists.contesting.com/archives//html/TenTec/2005-08/msg00403.html
------------------------------------------------------------------------------
----------------------------
Re: [TenTec] Scout Hiss
from [Phil Chambley, Sr.][Permanent Link][Original]
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Scout Hiss
From: "Phil Chambley, Sr." <k4dpk@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 22 Aug 2005 13:43:44 -0400
List-post: <mailto:tentec@contesting.com>
Thanks Stuart and others who answered....
My good friend Don Prouty at T/T told me this morning that the cure involves
adding .001ufd to ground from pin 7 of the audio output chip U-5, which is a
TDA-2611, 9-pin SIP. I passed this info to the owner of the Scout, who
immediately did the mod, and now reports a great improvement.
More of that GREAT TenTec service! Thanks, guys.
Phil Chambley, Sr.
K4DPK
VFO Stabilizers and PEP adapters for wattmeters...Check out www.k4dpk.com
************************************** AOL now offers free email to everyone.
Find out more about what's free from AOL at http://www.aol.com.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|