The horizontal line above the filter bandwidth graphic represents the
bandwidth of the roofing filter in use at 9 MHz. The filter bandwidth
graphically represents the ultimate selectivity implemented by the
BANDWIDTH control in the DSP IF and the (wider) roofing filter gets
selected automatically based on the BW control. Hope this helps. 73,
Allan, W1AEL in Sevierville, TN.
----- Original Message -----
From: <K5XS@aol.com>
To: <tentec@contesting.com>
Sent: Saturday, January 20, 2007 8:14 AM
Subject: [TenTec] O-2 Screen Lines
> > This is truly fun. I am figuring out the radio and trying to discover
> > every
> > little nook and cranny on it.
> >
> > One thing has me puzzled, and I can't find it in the manual.
> >
> > Immediately above the spectrum sweep scope is a horizontal line on which
> > the
> > rectangles representing the bandpasses for the main (left) and sub (right)
> > receivers rest. The line has a break in it, and it is decidedly off
> > center
> > (to the lest a bit).
> >
> > Does that line represent something? Does the break represent something?
> >
> > Thanks
> >
> > Bernie K5XS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|