TenTec
[Top] [All Lists]

[TenTec] Amp keying with Argonaut V 516

To: TenTec Reflector <tentec@contesting.com>,"Ten-Tec516@yahoogroups.com" <Ten-Tec516@yahoogroups.com>,meind@storm.ca
Subject: [TenTec] Amp keying with Argonaut V 516
From: "B. Lee Cornwell" <k2blc@earthlink.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 20 Jan 2007 08:22:13 -0500
List-post: <mailto:tentec@contesting.com>
There has been some discussion on this in the past......I finally got 
around to making something work for me......The idea of using the "T" 
line (12V on transmit only) was from Doug Mein, VA3DM, - Thanks Doug !! 
......The relay driver schematic was found in one of my old 
books...Check it out here:

http://home.earthlink.net/~k2blc/images/argoampmod1.jpg


Lee K2BLC

-- 
B. Lee Cornwell
http://home.earthlink.net/~k2blc/index.html

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Amp keying with Argonaut V 516, B. Lee Cornwell <=