Hello you all,
I have my TT565 Orion for 24 hours now and had already some questions about
this "strange" radio.
By "strange", I mean different from what I own before (Icom, Kenwood
TS-870S, Yaesu FT-990 and FT-1000) !
Right out of the box it seems not to be an excellent radio, just have to
customize it thru the menus and parameters.
Now it's okay, I have made 2 contacts this morning with "nice" audio reports
but...
Running latest firmware #1.371
If anyone could help me about that :
1. Sweep display :
------------------
- Sweep display activated and working, I mean moving (for Main receiver
only);
- On the SUB receiver, engage either the NR or AN function and the sweep is
completely frozen (no movements at all !);
- Remove the NR or AN function and the sweep display is dancing again !
Is this a normal behavior or not ?
2. Meter and AGC :
------------------
It seems that the meter needle is electronically controled by the AGC
system... well, in the case of a static discharge at the antenna, a "POP" is
heard thru the speaker, the needle is peaking at +20dB or +40dB and the AGC
is killed during half a second or so making the reception of the signal
impossible during this short amount of time !
I never have this "problem" with my FT-1000, the AGC was not killed by the
static discharge and I could still hear the audio behind it !
Is there a way to avoid that phenomenon ? The PROG AGC values cannot be set
to resolve this...
Many thanks for support.
Eric, ON6CV
http://www.qrz.com/callsign/ON6CV
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|