It appears the manual notch is also linked to the same step as the PBT/BW,
I've found that to be a real problem, sometimes you can go right by the
notch freq you want..
Tim
NZ8J
----- Original Message -----
From: "Grant Youngman" <nq5t@comcast.net>
To: <tentec@contesting.com>
Sent: Thursday, February 05, 2004 6:22 PM
Subject: Re: [TenTec] ORION RIT "Step"
> > I wish to keep
> > the RIT at 10 Hz but increase PBT/BW to 50 Hz steps.
> > I don't manage to do that.
> >
> > Am I doing something wrong or are these features coupled?
>
> I hadn't tried that before, but it appears they are indeed coupled, at
> least in the most current FW release. Either RIT ought to be fixed
> at 10 Hz (probably not the best answer), have it's own step size
> adjustment ( a good answer), or be logically linked to STEP size in
> some reasonable fashion (maybe, depending).
>
> Probably worth a note to ditsnbits@tentec.com. I'd call the current
> situation a buggie ...
>
> Grant/NQ5T
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|