The VFO's work opposite from each other. The threads inside that make the
slug move are clockwise in one and counter-clockwise in the other.
Other than that, I'm not sure of any difference between the PTO's
themselves. If you speak of the external PTO's, get the right one and don't
try to kluge the wrong one into working.
73, Mike N4NT
----- Original Message -----
From: "Don Rasmussen" <wb8yqj@yahoo.com>
To: <tentec@contesting.com>
Sent: Wednesday, August 27, 2003 12:07 PM
Subject: [TenTec] PTO transplant!
> Hi Guys,
>
> Can anyone comment on the interchangability of the
> original OMNI A/D PTO in the Corsair I or II?
>
> I am wondering what might be involved in a
> "transplant".
>
> Anyone have any experience with doing this or comments
> from looking at the shemos?
>
> Both PTOs have 4 wire hookups on the outside of the
> box and it appears from looking at the shemos that
> even though the parts tags are different, the parts
> values and connections are the same or very similar.
>
> Any help or comments appreciated!
>
> 73,
> Don Rasmussen WB8YQJ
> Carlsbad, Ca.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|