TenTec
[Top] [All Lists]

[TenTec] my omni 6+ and the Pro

To: <tentec@contesting.com>
Subject: [TenTec] my omni 6+ and the Pro
From: SteveBaron@starlinx.com (Steve Baron - KB3MM)
Date: Wed, 6 Jun 2001 21:36:38 -0000
Also only one thing to carry.

----- Original Message -----
From: "Simmons, Reid W" <reid.w.simmons@intel.com>
To: <tentec@contesting.com>
Sent: June 06, 2001 18:25
Subject: RE: [TenTec] my omni 6+ and the Pro


>
> I think the reason these rigs are used on a lot of "major" DXpeditions is
> because the manufacturer supplies (donates) them.  And when you are
> budgeting costs for a DXpedition, "free" is a very good price.
>
> Reid, K7YX
>
>
> -----Original Message-----
> From: Jim Lowman [mailto:jmlowman@ix.netcom.com]
> Sent: Wednesday, June 06, 2001 9:35 AM
> To: BobEZWRITER@aol.com
> Cc: tom.branch@qth.com; wwfletcher@webtv.net; tentec@contesting.com
> Subject: Re: [TenTec] my omni 6+ and the Pro
>
>
>
> I haven't measured it with a QRP wattmeter, Bob...mainly because I
> haven't assembled the kit yet!  But T-T rates the output at 0-100 watts
> and you have measured it at one watt, so I'm pretty sure that it will
> go down to five watts reliably.
>
> I'm tempted by the 756 Pro, as well as by the FT-1000D or MP...a lot of
> both get taken on DXpeditions, so they must have something going.
>
> This discussion goes around from time to time, and I'm glad to hear
> some comparisons with the Japanese top-of-the-line radios and the Omni
> 6+ in terms of CW operation, which is the reason that a lot of us who
> bought the 6+ did so.
>
> 73 de Jim - AD6CW
>
>
> BobEZWRITER@aol.com wrote:
> >
> > Well, been listening to the debate about the Pro vs. the 6+.  i was
going
> to buy the Pro, but got a used 6+ instead.  not as fancy, but does
> everything i want on CW.  no real bells and whistles, but with my 250 hz
cw
> filter, i can work everything.  with a dipole at 25' worked all over the
> world.
> >
> > a question for u Omni 6+ owners.  Ten Tec i think says the 6+ won't go
> below 8 watts.  yet on my external watt meter, i can tune it down to
nearly
> 0 watts.  on 1 watt on my ext. watt meter being shown, i've worked Japan
on
> my dipole.
> >
> > Have any of u folks found u can QRP with the 6+ below 8 watts?
> >
> > 73, Bob, KZ2G
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>