Hi Guys,
After doing a bit more investigation into this little wonder introduced by
George, I have come across many sites selling it for $99 and at least one
site offering the whole users manual in .pdf format.
I was happy to come across a complete manual to make sure it would do what I
wanted it to do.
Here is the link for the MX602A manual, available in many languages.
http://www.behringer.de/eng/support/manuals/mx602a.htm
Can't wait for mine to arrive and have a better interface for both my Omni
6+ and TS-870.
Tnx agn George!
73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
BIRD Power Measuring equipment, Still THE most accurate in the world!
Tohtsu coaxial relays, Samlex 25A power supply, Maha batteries & chargers
www.radiodan.com <http://www.radiodan.com/> RFpower@radiodan.com
<mailto:RFpower@radiodan.com> A trip to our web site is worth the click!
-----Original Message-----
From: owner-tentec@contesting.com [mailto:owner-tentec@contesting.com]On
Behalf Of George, W5YR
Sent: Monday, May 21, 2001 12:33 PM
To: Jack, W7EJJ
Cc: Ten-Tec
Subject: Re: [TenTec] Now I see!
Or, do as I do:
All audio in and out of all rigs (3), plus the computer soundcard,
terminates in a Behringer MX602A Mixer which in turn drives a large stereo
amplifier and speaker system.
Any mic or receiver or computer audio source can be fed into any radio or
the soundcard at the twist of a mixer knob. Any audio signal out from any
radio or the soundcard can be fed to the soundcard and the speaker system
and headphones. All this with complete level and parametric EQ control of
every channel.
Although all my audio circuits are single-ended, the Jupiter audio could be
readily fed into any of 4 input channels on the mixer which all accept
blanaced or unbalanced inputs.
The little miracle box costs $99 at any music store that carries recording
electronics. Mine is absolutely RFI bullet-proof. Distortion and hum are
non-existent.
72/73, George W5YR - the Yellow Rose of Texas QRP-L 1373 NETXQRP 6
Fairview, TX 30 mi NE of Dallas in Collin county EM13qe
Amateur Radio W5YR, in the 55th year and it just keeps getting better!
Icom IC-756PRO #02121 Kachina #91900556 IC-765 #02437
"Jack, W7EJJ" wrote:
>
> Hi William:
> The big problem is trying to mix audio with other rigs, I like to use
> one speaker for the Jupiter, JRC NRD-545, JRC JST-145 and a ICOM IC-718
for
> backup. By having all audio standard it is switchable between rigs. Only
two
> radios that I know of that use the balanced ungrounded output is the
Jupiter
> and the Drake SW-8. As you can see it is not compatible with most rigs.
> Otherwise we would have a ham shack full of speakers all working at the
same
> time.
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|