Are you using a TT amp or auto tuner??
It sounds to me like the cables from TX OUT or TX EN are the problem.
If you aren't using a tuner or amp make sure these two points are
jumpered.
73,
Rick
VE7ASR
-----Original Message-----
From: owner-tentec@contesting.com
[mailto:owner-tentec@contesting.com]On
Behalf Of Clark Savage Turner
Sent: Saturday, March 03, 2001 15:34 PST
To: tentec@contesting.com
Subject: [TenTec] OMNI VI t/r problem, clues?
Well, the receiver is fine but after a long time I decided to
transmit.
Nothing! No T/R action. The receiver barely mutes. The ALC light
does
not come on (like the time static discharges took out the diodes on
the
SWR board...) when I hit the PTT in SSB. Of course, since the
receiver
does not mute, no output on transmit. In fact, the S meter still
reads
received signal strength even when I hit the "tune" button. Sounds
like
it must be simple (or even pilot error!!!) Any clues for me?
Clark
WA3JPG
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|