Frank;
I believe the PS for the Omni VI puts out 13.8 (mine does anyway) and I have
not lost a bulb in the 8+ years I have had it. I have not looked at the
bulb ratings in it but if I were the designer I would use 14 volt bulbs in a
rig whose PS puts out 13.8 volts.
Reid, K7YX
Beaverton, OR
-----Original Message-----
From: Frank Krozel [mailto:frank@electronicinstrument.com]
Sent: Thursday, September 14, 2000 9:34 AM
To: tentec@contesting.com
Subject: [TenTec] Ten Tec rigs and "other" power supplies
I love to trade rigs, and from time to time I get a Ten Tec rig with burned
out bulbs. In addition, I see people using a Ten Tec rig with "another"
power supply.
As the Ten Tecs all run at 12 volts, as opposed to 13.8 or higher volts, I
am curious IF there is a connection with burned out bulbs ( are Ten Tec's
rated at 12 volts? ) and using "other" supplies.
My Ten Tec Triton II (yes 2!) still has the original bulbs in it, but the
supply is the matching one, set at 12 volts or so.
Frank Krozel
KG9H
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|