Hi Alan,
On my OMNI D I kind have the same problem when switching from one band to
another. Most of the time I just wiggle the switch back and forth a little
and the band will come in great. I don't know if you've ever looked inside
of your OMNI D, but the band switch shaft is connected to a chain that turns
another shaft with the contacts on it. There is a little play in that chain.
73, --Roy-- KC8CHR
-----Original Message-----
From: ARDUJENSKI@aol.com <ARDUJENSKI@aol.com>
To: TenTec@contesting.com <TenTec@contesting.com>
To: <tentec@contesting.com>
Date: Sunday, December 26, 1999 12:49 PM
Subject: [TenTec] BANDSWITCH PROBLEM
>
>On my OMNI-D the band selector switch will cause a bit of a problem by not
>making good contact and get then get an intermittant 9.000 on the readout.
Is
>there a simple fix short of replacing the bandswitch? Alan KB7MBI
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|