Hi Bruce -
A common problem is the filters break loose because the UPS
gorillas have a party. Open the rig and pull the main filters
out and carefully push the pins back in to make sure they are
snug.
Secondly, check ALL board connectors to see that they are seated,
it is really not that hard for them to come loose in shipping,
Ten Tec can't really prevent all of that from happening.
Just be patient and look it over, it will turn out allright
in the end!
Clark
WA3JPG
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|