I make a DOS boot floppy for the P-133 over at W6UE and
let the machine boot up in DOS mode. TRlog seems to run
just fine in this configuration. Running from a DOS window
under WIN98 always seems to produce strange results
(sluggish performance, keyer hiccups, etc). At home, for
CW SS and Phone SS, I just restarted my P-133 x Win98
machine in MS-DOS mode. This also worked fine even
with SBDVP running during the phone contest.
On the 486-66 in the main operating position at W6UE,
I turned on SMARTDRV per Dave's suggestion. This
seemed to cure all the disc related hesitation on this slower
machine. The P-133's don't seem to need it though.
73 de Mike, W4EF................
----- Original Message -----
From: "David O Hachadorian" <k6ll@juno.com>
To: <trlog@contesting.com>
Sent: Monday, November 26, 2001 4:12 AM
Subject: Re: [TRLog] Minimum PC requirements for TRLOG
>
> My usual fix for this, using WIN 95 DOS, or real 6.2 DOS,
> is to load a disk write-cache utility prior to starting TR.
> The one I use is SMARTDRV, which is in the DOS 6.2 files,
> and is somewhere in the Windows 95 files. The syntax is to
> type the following at the DOS prompt, prior to starting TR:
>
> LOADHIGH SMARTDRV C+
>
> Where C is the name of the hard drive. The plus enables the
> computer to do other things while the data to be written to
> the hard drive is cached for a brief period.
>
> It was stated on this reflector recently that SMARTDRV is not
> provided with WIN 98. I don't know if that is correct, or if
> the WIN 95 version of SMARTDRV will work with WIN 98, but you
> could try.
>
> Another possible alternative is to try running TR in a DOS Window
> under WIN 98, where WIN 98 will manage the cache.
>
> I saw Doc Evans' subsequent post on this subject, and his problem
> could be
> addressed in the same way, but Doc is a nonbeliever in disk
> write-caching, and has put a caution in the manual against running
> one. On the other hand, I have used one successfully for years on
> a multitude of machines, all slower than yours, at home and as a
> guest op.
>
> Dave Hachadorian, K6LL
> Yuma, AZ
> K6LL@juno.com
>
>
> On Mon, 26 Nov 2001 08:23:22 -0600 "Rich Beckwith" <wn0x@earthlink.net>
> writes:
> >
> > It may have something to do with the way TR hits the disk during
> > these
> > operations.
> >
> > In S&P when I hit <enter> I hear a lot of disk chattering at the
> > same time
> > that it is sending my call. It will usually delay on the first
> > character.
> > After I enter the exchange and hit <enter> I here the disk chatter
> > again and
> > it will stall at various times during the exchange. Slow disk
> > drive?
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/trlog
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|